Best MS Plates & Sheets Supplier in Vadodara
Hot-rolled steel plates and sheets for fabrication, structures, boilers, pressure vessels and heavy equipment. We supply IS 2062 structural plates through to boiler-quality, high-strength and abrasion-resistant grades, plus shot-blasted and primer-coated plates.
- Thickness
- 6 – 150 mm
- Width
- Up to 4,500 mm
- Grades
- IS 2062 E250 – E450, S355, A516, A537, A572, API, Q&T
- Supply
- As-rolled, TMCP, normalized, Q&T, shot-blasted & primed
MS Plate Brands and Grades Available
Brands: AM/NS India, SAIL, Jindal, Tata Steel, POSCO and imported plates. Grades: IS 2062 E250 – E450, EN 10025 S235 – S460, ASTM A36, A516, A537, A572, API 5L / 2H / 2W and quenched & tempered grades.
-
-
-
-
-
- Imported
MS plate size & weight chart
Plate weight = length (m) × width (m) × thickness (mm) × 7.85 kg.
MS Plate Weight Chart
Density 7.85 g/cm³ · theoretical weights| Thickness | Weight (kg/m²) | 2500 × 1250 mm sheet (kg) | 6300 × 2500 mm plate (kg) |
|---|---|---|---|
| 5 mm | 39.25 | 122.7 | 618.2 |
| 6 mm | 47.1 | 147.2 | 741.8 |
| 8 mm | 62.8 | 196.3 | 989.1 |
| 10 mm | 78.5 | 245.3 | 1,236.4 |
| 12 mm | 94.2 | 294.4 | 1,483.7 |
| 14 mm | 109.9 | 343.4 | 1,730.9 |
| 16 mm | 125.6 | 392.5 | 1,978.2 |
| 18 mm | 141.3 | 441.6 | 2,225.5 |
| 20 mm | 157 | 490.6 | 2,472.8 |
| 22 mm | 172.7 | 539.7 | 2,720 |
| 25 mm | 196.25 | 613.3 | 3,090.9 |
| 28 mm | 219.8 | 686.9 | 3,461.9 |
| 32 mm | 251.2 | 785 | 3,956.4 |
| 36 mm | 282.6 | 883.1 | 4,451 |
| 40 mm | 314 | 981.3 | 4,945.5 |
| 45 mm | 353.25 | 1,103.9 | 5,563.7 |
| 50 mm | 392.5 | 1,226.6 | 6,181.9 |
| 56 mm | 439.6 | 1,373.8 | 6,923.7 |
| 63 mm | 494.55 | 1,545.5 | 7,789.2 |
| 70 mm | 549.5 | 1,717.2 | 8,654.6 |
| 80 mm | 628 | 1,962.5 | 9,891 |
| 90 mm | 706.5 | 2,207.8 | 11,127.4 |
| 100 mm | 785 | 2,453.1 | 12,363.8 |
| 110 mm | 863.5 | 2,698.4 | 13,600.1 |
| 120 mm | 942 | 2,943.8 | 14,836.5 |
| 140 mm | 1099 | 3,434.4 | 17,309.3 |
| 150 mm | 1177.5 | 3,679.7 | 18,545.6 |
Plate size capability
As per AM/NS India plate mill capability| Thickness | 6 – 150 mm |
| Width | 1,500 – 4,500 mm |
| Length | Up to 20,000 mm (depends on thickness & width) |
| Width tolerance | −0 / +20 mm |
| Length tolerance | −0 / +20 mm |
Shot-blasted & primer-coated plates
Ready for fabrication and painting| Thickness | 6 – 50 mm |
| Width | 1,200 – 4,800 mm |
| Length | 4,000 – 12,000 mm |
| Surface finish | Up to 250 Ra |
| Shot blasting | Free from mill scale, ISO 8501 A SA 2.5 |
| Primer coating | Iron oxide epoxy or zinc silicate based |
| Coating thickness | 15 – 25 microns (single coat) |
Plate grades & mechanical properties
Specification, supply condition, thickness range, carbon equivalent, minimum yield (YS) and tensile (UTS) strength for each grade.
As-Rolled & TMCP Supply Condition
39 grades| Specification / grade | Supply | Thickness (mm) | Ceq max. | YS min. (MPa) | UTS min. (MPa) | Remarks |
|---|---|---|---|---|---|---|
| General EngineeringLow and intermediate tensile strength carbon steel plates | ||||||
| ASTM A 283 Gr. C | AR | 8.0 – 40.0 | 0.35 | 205 | 380 | – |
| EN 10025-2 S235 JR; J0; J2 | AR | 8.0 – 40.0 | 0.38 | 235 | 360 | For J2 CVN @ −20°C: 27J min |
| EN 10025-2 S235 JR; J0; J2 | AR | 40.1 – 150.0 | 0.38 | 195 | 360 | For J2 CVN @ −20°C: 27J min |
| IS 2062 E250 BR/B0/C, JIS G 3101 SS 400, ASTM A36 | AR | 8.0 – 40.0 | 0.42 | 250 | 410 | – |
| IS 2062 E250 | AR | 40.1 – 150.0 | 0.42 | 230 | 410 | – |
| IS 2062 E250 with Cu | AR | 8.0 – 80.0 | 0.41 | 250 | 410 | With Cu 0.35 max |
| IS 2062 E250 BR/B0/C | AR | 8.0 – 40.0 | 0.39 | 250 | 410 | CVN @ −20°C: 27J min |
| IS 2062 E250 BR/B0/C | AR | 40.1 – 150.0 | 0.39 | 250 | 410 | CVN @ −20°C: 27J min |
| IS 2062 E300 BR/B0/C, ASTM A572 Gr.45 Type I, II, III | AR | 8.0 – 40.0 | 0.44 | 290 | 440 | – |
| IS 2062 E300 BR/B0/C, ASTM A572 Gr.45 | AR | 40.1 – 80.0 | 0.44 | 280 | 440 | – |
| EN 10025-2 S275 JR; J0; J2 | AR | 8.0 – 40.0 | 0.40 | 275 | 430 | For J2 CVN @ −20°C: 27J min |
| General EngineeringC-Mn-Silicon steel for atmospheric temperature service | ||||||
| ASTM A 573 Gr. 70 | AR | 8.0 – 70.0 | 0.44* | 260 | 485 | – |
| General EngineeringHigh tensile structural steels | ||||||
| CSA G40.21 44W | AR | 20.0 – 40.0 | – | 290 | 450 | – |
| CSA G40.21 44W | AR | 40.1 – 85.0 | – | 290 | 450 | – |
| CSA G40.21 44W | AR | 85.1 – 150.0 | – | 290 | 450 | – |
| EN 10025-2 S355 J2+N, ASTM A572 Gr.50 Type I, II, III | AR | 8.0 – 20.0 | – | 345 | 470 | – |
| EN 10025-2 S355 J2+N, ASTM A572 Gr.50 Type III | AR / FN | 65.1 – 85.0 | – | 325 | 470 | – |
| EN 10025-2 S355 J2+N, ASTM A572 Gr.50 Type III | AR | 85.1 – 100.0 | – | 315 | 470 | – |
| IS 2062 E350 BR/B0/C | AR + FN | 40.0 – 85.0 | 0.45 | 320 | 490 | For "C" CVN @ −20°C: 27J |
| IS 2062 E410 BR/B0/C | AR | 8.0 – 40.0 | 0.5 | 410 | 540 | For J2 CVN @ −20°C: 27J |
| IS 2062 E410 BR/B0/C | AR | 40.1 – 65.0 | 0.5 | 390 | 540 | For J2 CVN @ −20°C: 27J |
| EN 10025-2 S460 J2 | AR | 8.0 – 25.0 | 0.52 | 460 | 550 | For J2 CVN @ −20°C: 27J |
| EN 10025-2 S460 J2 | AR | 25.1 – 50.0 | 0.52 | 430 | 550 | For J2 CVN @ −20°C: 27J |
| IS 2062 E450 BR/B0 | TMCR | Up to 25 | 0.52 | 450 | 570 | – |
| Ship BuildingHigh strength steel plates for ships | ||||||
| ABS, DNV, GL, NKK, IRS, BV — ASTM A 131 AH36 & DH36 | TMCP | 8.0 – 40.0 | 0.38** | 355 | 490 | BV, ABS, DNV, GL, NKK, LR: AH36 & DH36 |
| Line PipeNon-sour service pipe (PSL-1, PSL-2) | ||||||
| API 5L Gr. B | TMCP | 8.0 – 40.0 | – | 250 | 420 | – |
| API 5L X-52 | TMCP | 18 – 25 | – | 370 | 460 | DWTT @ −10°C: 85% |
| API 5L X-52 | TMCP | 25 – 40 | – | 370 | 460 | DWTT @ −10°C: 85% |
| API 5L X-60 | TMCP | 15 – 20 | – | 420 | 520 | Hardness 210 HV10 max |
| API 5L X-60 | TMCP | 16 – 20 | – | 420 | 520 | DWTT @ −10°C: 85% |
| API 5L X-70 | TMCP | 15 – 20 | – | 490 | 570 | DWTT @ −10°C: 85% |
| API 5L X-70 | TMCP | 20 – 25 | – | 490 | 570 | DWTT @ −10°C: 85% |
| API 5L X-70 | TMCP | 8.0 – 13.0 | – | 500 | 565 | DWTT @ −10°C: 85% |
| API 5L X-80 | TMCP | 14 – 25 | – | 555 | 630 | DWTT @ −10°C: 85% |
| Line PipeSour service pipe | ||||||
| API 5L X-52 (Sour) | TMCP | 15 – 20 | – | 370 | 460 | DWTT @ −10°C: 85%, CTR: 5%, CLR: 15%, CSR: 1.5% |
| API 5L X-60 (Sour) | TMCP | 12 – 15 | – | 430 | 530 | DWTT @ −10°C: 85%, CTR: 5%, CLR: 15%, CSR: 1.5% |
| API 5L X-65 (Sour) | TMCP | 14 – 17 | – | 450 | 540 | DWTT @ −10°C: 85%, CTR: 5%, CLR: 15%, CSR: 1.5% |
| API 5L X-65 (Sour) | TMCP | 17 – 25 | – | 450 | 540 | DWTT @ −10°C: 85%, CTR: 5%, CLR: 15%, CSR: 1.5% |
| Offshore Structures & PlatformsPlates for offshore structures | ||||||
| API 2W-50 LS | TMCP | 6 – 63 | 0.39 – 0.41 | 345 – 517 | 448 | – |
Normalized Supply Condition
29 grades| Specification / grade | Supply | Thickness (mm) | Ceq max. | YS min. (MPa) | UTS min. (MPa) | Remarks |
|---|---|---|---|---|---|---|
| General EngineeringHigh tensile structural steels | ||||||
| EN 10025-2 S355 J2, JR, J0 / ASTM A572 Gr.50 Type I, II, III | NR / FN | 20.1 – 30.0 | – | 345 | 470 | – |
| EN 10025-2 S355 J2, JR, J0 / ASTM A572 Gr.50 Type I, II, III | NR / FN | 30.1 – 40.0 | – | 345 | 470 | – |
| EN 10025-2 S355 J2, JR, J0 / ASTM A572 Gr.50 Type I, II, III | NR / FN | 40.1 – 50.0 | – | 335 | 470 | – |
| EN 10025-2 S355 J2, JR, J0 / ASTM A572 Gr.50 Type I, II, III | NR / FN | 50.1 – 65.0 | 0.47 | 335 | 470 | – |
| EN 10025-2 S355 J2, JR, J0 / ASTM A572 Gr.50 Type I, II, III | NR / FN | 65.1 – 85.0 | – | 325 | 470 | – |
| EN 10025 S355 J2+N | NR / FN | 15.0 – 40.0 | 0.47 | 345 | 470 | Z25 through thickness |
| IS 2062 E350 BR, B0, C | NR / FN | 40.0 – 85.0 | 0.45 | 320 | 490 | CVN @ −20°C: 27J |
| EN 10025-3 S420N | NR / FN | 6.0 – 63.0 | – | – | – | – |
| Boiler & Pressure VesselC-Si steels for intermediate and higher temperature service | ||||||
| ASTM/ASME A 515 Gr. 60 | FN | 8.0 – 40.0 | 0.45 | 220 | 415 | – |
| ASTM/ASME A 515 Gr. 70 | FN | 8.0 – 40.0 | 0.45 | 260 | 485 | – |
| Boiler & Pressure VesselC-Mn-Si heat-treated steel for fusion welded pressure vessels | ||||||
| ASTM/ASME A 537 Cl. 1 | FN | 8.0 – 40.0 | 0.43 | 345 | 485 | With PWHT |
| ASTM/ASME A 537 Cl. 1 | FN | 40.0 – 65.0 | 0.43 | 345 | 485 | With PWHT |
| Boiler & Pressure VesselWeldable fine grained normalized steels for flat products | ||||||
| EN 10028-3 P275NH | FN | 40.0 – 80.0 | 0.4 | 275 | 390 | – |
| EN 10028-3 P355NH | FN | 40.0 – 80.0 | 0.43 | 350 | 490 | Elevated temperature tensile |
| Boiler & Pressure VesselSteels for pressure purposes with specified elevated temperature | ||||||
| EN 10028-2 16Mo3+N | FN | 6.0 – 80.0 | – | – | – | – |
| Boiler & Pressure VesselCarbon steels for moderate and lower temperature service | ||||||
| ASTM/ASME A 516 Gr. 60 | FN | 6.0 – 24.0 | 0.42 | 220 | 415 | CVN @ −50°C: 18J |
| ASTM/ASME A 516 Gr. 60 | FN | 24 – 80.0 | 0.42 | 220 | 415 | CVN @ −50°C: 18J |
| ASTM/ASME A 516 Gr. 60 | FN | 6.0 – 24.0 | 0.42 | 220 | 415 | With PWHT, CVN @ −50°C: 18J |
| ASTM/ASME A 516 Gr. 60 | FN | 24 – 80.0 | 0.42 | 220 | 415 | With PWHT, CVN @ −50°C: 18J |
| ASTM/ASME A 516 Gr. 60 (NACE) | FN | 8.0 – 40.0 | 0.4 | 220 | 415 | With HIC |
| ASTM/ASME A 516 Gr. 65 | FN | 8.0 – 80.0 | 0.4 | 240 | 450 | – |
| ASTM/ASME A 516 Gr. 70 | FN | 8.0 – 40.0 | 0.43 | 260 | 485 | With PWHT |
| ASTM/ASME A 516 Gr. 70 | FN | 40.0 – 80.0 | 0.45 | 260 | 485 | With PWHT |
| ASTM/ASME A 516 Gr. 70 | FN | 80.0 – 90.0 | 0.47 | 260 | 485 | With PWHT |
| ASTM/ASME A 516 Gr. 70 (NACE) | FN | 8.0 – 40.0 | 0.4 | 260 | 485 | With HIC |
| Boiler & Pressure VesselCarbon pressure vessel & boiler steels for intermediate high temperature service | ||||||
| IS 2002 Gr. 3, ASTM/ASME A515 Gr. 70 | FN | 20.0 – 40.0 | 0.45 | 285 | 460 | – |
| Ship BuildingNormal and high strength steel plates for ships | ||||||
| ABS, DNV, GL, NKK, IRS, BV — ASTM A 131 Gr. A, B, D & E | FN | 8.0 – 70.0 | 0.40* | 235 | 400 | – |
| ASTM A 131 EH36 | FN | 20.0 – 85.0 | – | 355 | 490 | – |
| Offshore Structures & PlatformsPlates for offshore structures | ||||||
| API 2H Gr. 50 | FN | Up to 100 | 0.43 – 0.45 | 345 (t ≤ 2.5") | 483 | CVN @ −40°C, C & Z properties (Z35) |
Quenched & Tempered Supply Condition
15 grades| Specification / grade | Supply | Thickness (mm) | Ceq max. | YS min. (MPa) | UTS min. (MPa) | Remarks |
|---|---|---|---|---|---|---|
| High Strength StructuralHigh strength weldable steels for structural applications | ||||||
| EN 10025-6 S620QL | Q+T | 12.0 – 40.0 | 0.65 | 620 | 690 | CVN @ −40°C: 27J |
| EN 10025-6 S690QL | Q+T | 8.0 – 25.0 | 0.46 | 690 | 780 | CVN @ −40°C: 27J |
| EN 10025-6 S690QL | Q+T | 20.0 – 80.0 | – | 690 | 770 | CVN @ −20°C: 27J |
| EN 10025-6 S890QL | Q+T | 6.0 – 80.0 | 0.72 | 890 | 940 – 1100 | – |
| Hydropower & PenstockHigh strength alloy & C-Mn-Si heat-treated steels for fusion welded pressure vessels | ||||||
| ASME/ASTM A 517 Gr. F | Q+T | 8.0 – 65.0 | 0.57 | 690 | 795 | – |
| ASME/ASTM A 537 Cl. 2 | Q+T | 8.0 – 40.0 | 0.45 | 415 | 550 | – |
| Boiler & Pressure VesselChromium-molybdenum low alloy steels for elevated temperature service | ||||||
| ASME/ASTM A 387 Gr. 11 Cl. 2, Gr. 11 Cl. 1, Gr. 12 Cl. 1 | N+T / Q+T | 8.0 – 65.0 | – | – | – | With PWHT, J factor 150 max |
| ASME/ASTM A 387 Gr. 11 Cl. 2, Gr. 12 Cl. 2 | N+T / Q+T | 8.0 – 40.0 | – | 310 | 515 | %C 0.15 max, J factor 150 max |
| ASME/ASTM A 387 Gr. 22 Cl. 2 | N+T / Q+T | 8.0 – 40.0 | – | 310 | 515 | %C 0.15 max, J factor 150 max |
| Boiler & Pressure VesselHeat-treated C-Mn-Si pressure vessel plates for moderate and lower temperature service | ||||||
| ASME/ASTM A738 Gr. B | Q&T | 6.0 – 40.0 | – | 415 | 705 | Step cooling |
| Abrasion & Wear ResistantEarth moving equipment (hardness in BHN) | ||||||
| ROCKSTAR 400 | Q / Q+T | 8.0 – 20.0 | 0.45 | – | 360 – 430 BHN | – |
| ROCKSTAR 400 | Q / Q+T | 20.1 – 32.0 | 0.48 | – | 360 – 430 BHN | – |
| ROCKSTAR 400 | Q / Q+T | 32.0 – 80.0 | 0.48 | – | 360 – 430 BHN | – |
| ROCKSTAR 450 | Q / Q+T | 8.0 – 20.0 | 0.55 | – | 400 – 460 BHN | – |
| ROCKSTAR 500 | Q / Q+T | 6.0 – 50.0 | – | – | 450 – 540 BHN | – |
AR – As Rolled · TMCP – Thermo-Mechanical Controlled Processing · TMCR – Thermo-Mechanical Controlled Rolling · NR – Normalized Rolling · FN – Furnace Normalized · Q+T – Quenched & Tempered · N+T – Normalized & Tempered
Source: AM/NS India heavy plate catalogue. Special requirements can be reviewed case to case.
Why Buy MS Plates & Sheets from Nakshatra Steel — Best Quality, Best Brands
Nakshatra Steel — MS Plate supplier, dealer and stockist in Pratapnagar, Vadodara (Baroda). We supply best-quality MS Plates & Sheets from leading mills at fair daily rates, with delivery PAN India.
Bulk MS Plates & Sheets Supply in Vadodara
We quote for project and factory quantities. Share a size-wise list and we will price the full order against the day’s mill rate. Grades: IS 2062 E250 – E450, S355, A516, A537, A572, API, Q&T.
PAN India Delivery — Across India
We deliver MS Plates & Sheets PAN India — to project, factory and construction sites across every state, dispatched from our base in Pratapnagar, Vadodara. Freight and delivery time are confirmed with your quote.
Where MS Plates & Sheets are used
MS Plates & Sheets — Frequently Asked Questions
Who is the best MS Plate supplier in Vadodara (Baroda)?
Nakshatra Steel, Pratapnagar, Vadodara supplies best-quality MS Plates & Sheets from top brands (AM/NS India, SAIL, Jindal, Tata Steel, POSCO and imported plates) with mill test certificates, correct weights, competitive daily rates and PAN India delivery. Call or WhatsApp +91 95129 14443 for today’s rate.
Which MS Plate brands can I order?
Brands: AM/NS India, SAIL, Jindal, Tata Steel, POSCO and imported plates. Grades: IS 2062 E250 – E450, EN 10025 S235 – S460, ASTM A36, A516, A537, A572, API 5L / 2H / 2W and quenched & tempered grades.
What sizes and grades of MS Plates & Sheets are available?
Thickness: 6 – 150 mm. Width: Up to 4,500 mm. Grades: IS 2062 E250 – E450, S355, A516, A537, A572, API, Q&T. Supply: As-rolled, TMCP, normalized, Q&T, shot-blasted & primed. Send your size list to confirm current stock.
Can I get a bulk quotation for MS Plates & Sheets?
Yes. Send your size-wise quantities by WhatsApp, phone or the quote form and we will reply with a quotation for the full order at the day’s rate.
Do you deliver MS Plates & Sheets across India?
Yes. We deliver PAN India, to sites in every state, dispatched from Vadodara, Gujarat. Freight and delivery time are confirmed with the quote.
What is today’s MS Plate price in Vadodara?
Steel prices change daily with mill rates. Call or WhatsApp +91 95129 14443 with the sizes and quantity you need, and we will confirm the current rate and availability.
How do I calculate MS plate weight?
Plate weight (kg) = length (m) × width (m) × thickness (mm) × 7.85. For example, a 2.5 m × 1.25 m × 10 mm plate weighs about 245 kg.
Which plate grade is used for general fabrication?
IS 2062 E250 (equivalent to ASTM A36 / JIS SS 400) is the standard grade for general structural fabrication. E350 or S355 is used where higher strength is needed.
Other products
Flat Products Steel Coils
HR and CR coils for manufacturing, pipe making and sheet work.
View sizes & details
Reinforcement TMT Bars
6 – 40 mm rebars in Fe 500D, 550D & 600 from SAIL, JSW, Jindal, Tata and RINL.
View sizes & details
Pipes MS Pipes & Tubes
ERW, GI & seamless pipes from Tata, Jindal SAW, Apollo, Asian, ISMT and Maharashtra Seamless — 15 to 600 NB.
View sizes & detailsGet a Quote for MS Plates & Sheets
Prices follow the day’s mill rate. Send sizes, quantity and delivery location — we reply with rate, stock and delivery time.
MS Plates & Sheets quote request
Tell us what you need. Your enquiry opens in WhatsApp (or email) ready to send — no sign-up needed.